Grundfos

grundfos

grundfos

  • Centrifugal pumps
  • Stainless steel, titanium
  • Vertical multi-stage
  • Circulators
  • Submersibles
  • E-pumps (integrated vfd)
  • Pressure boosting and constant pressure systems

On-Line Sizing Software:  Launch WEBCAPS   0l

 

 

CR, CRE 

g.1
The CRE pump is a CR pump, motor and integrated variable frequency drive. The CRE pump is a system which is able to solve application problems and save energy.

The basic CR pump range, which can be applied in almost any industrial solution, is already in itself the broadest range available. Through our modular approach, we have made it even broader.

The basic CR pump range is available in four different materials: cast iron, two grades of stainless steel, and all-titanium. There are eleven flow sizes, capable of producing up to almost 725 psi pressure, and with a variety of shaft seals, rubber materials and supply voltages.

Pump parts which are typically vulnerable to difficult liquids or particularly demanding operating conditions can be optimized for their purpose and designed for specific requirements.

Features and benefits :

  • The CR pump, motor and VFD is an engineered product
  • The CRE pump is supplied by one supplier
  • Reduces installation and wiring costs
  • The functionalities are designed for specific pump applications
  • The CRE pump with sensor is a plug and pump product
  • Grundfos quality and reliability
  • A compact system
  • The pump, motor and VFD are tested as a complete unit in the factory

 

 

CR-H; CRN-H, CRE-H; CRNE-H

g.2 All the benefits of the renowned Grundfos CR for an ANSI dimensional solution that will fit into your existing pump and piping footprint with no modifications (ANSI / ASME B73.1 piping dimensions).

The Grundfos CR-H offers optimized duty points to maximize pump efficiency and minimize internal wear.  The result? Significant reduction in energy costs, maintenance effort and downtime along with increased pump life.

Applications :

Drop in replacement (ANSI / ASME B73.1 Piping layout) pump solutions for:

  • Industrial / Chemical Processing systems
  • Washing and cleaning systems
  • Pumping of acids and alkalis
  • Filtration systems
  • Water Pressure Boosting
  • Water Treatment
  • HVAC
  • Irrigation

 

CM, CME

g.3The horizontal multistage pump CM has been created with compactness and modularity as two of its central features, making numerous configurations possible. The pump is basically composed of a series of interchangeable modules, all of which have been designed to work together seamlessly, no matter what the application.

The pumps are of the close-coupled type.

The difference between the CM and the CME pump ranges is the motor. CM pumps are fitted with mains-operated motors, whereas the motors for CME pumps have an integrated frequency converter.

Both CM and CME pumps have mechanical shaft seals.

The CM and CME pumps are available in cast iron or stainless steel (AISI 304/DIN 1.4301 stainless steel, which is for water and non-corrosive liquids, and AISI 316/DIN 1.4401 stainless steel, which offers a high degree of corrosion protection against aggressive liquids).

 

Features and benefits :

  • Compact design
  • Modular construction/customized solutions
  • Worldwide usage
  • High reliability
  • Service-friendly
  • Wide performance range
  • Low noise level
  • High-performance hydraulics
  • Electro-coated cast-iron parts
  • Customized solutions
  • Grundfos motor

> Check out the CME Plus Constant Pressure System

MTR – SPK – CRK – MTC
g.4
MTR, SPK, CRK, and MTC pumps are vertical multistage centrifugal pumps designed for pumping of cooling lubricants for machine tools, condensate transfer and similar applications.

The pumps are designed to be mounted on top of tanks with the pump stack immerged in the pumped liquid.

Grundfos MTR, SPK, CRK, and MTC pumps come with various pump sizes and various numbers of stages to provide the flow, the pressure and the length required.

The MTR, SPK, and CRK pumps consist of two separate main components: The motor and the pump unit. The MTC pump is close coupled and the motor and pump end cannot be separated.

The pump unit consists of optimized hydraulics, various types of connections, a motor stool, a given number of chambers and various other parts.

Applications

The immersible pumps are suitable for liquid transfer in all applications where you have a tank. As main applications the following can be mentioned:

  • Lathes
  • Milling machines
  • Boring machines
  • Drilling machines
  • Machining centers
  • Grinding machines
  • Filtering systems
  • Swarf conveyors
  • Spark machine tools
  • Industrial washing machines
  • Cooling units

SL
g.5
The Grundfos SLV and SL1 pumps are designed to handle unscreened sewage, effluent, large volumes of surface water and process water in municipal, utility and industrial applications.

The pumps are available with SuperVortex impellers (SLV) or high efficient channel impellers (SL1), allowing for free passage of solids up to 100 mm in size.

The SLV and SL1 pumps are designed for permanent submerged installation, e.g. by means of an auto coupling or a guide rail system, or for free-standing installation on a ring stand with a flexible pipe connection.

Applications :

The SL pumps are designed to optimize the operation of a system. Reliability, simple service, and complete system compatibility are some of the main advantages.

SL pumps are designed for submerged use in network pumping stations, wastewater treatment plants, public buildings, blocks of flats, and industry.

Features and benefits :

  • Cable plug connection
  • Unique clamp connection
  • Single-channel and vortex impellers
  • Solids passage up to 100 mm
  • Unique cartridge shaft seal
  • Modular design
  • Minimum downtime
  • Motor based on premium efficiency components
  • Many sensor options

 

SP
g.6
Grundfos SP submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SP pumps are ideal for a wide variety of applications.

Grundfos SP pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, the SP pumps provide low long-term costs and high operating reliability regardless of the application.

The Grundfos SP range offers high efficiency, high resistance to sand and other abrasives and easy maintenance. A complete monitoring and control system is available for constant optimisation of the pumping system.

Applications :

The pumps are suitable for:

  • Groundwater supply to waterworks
  • Irrigation in horticulture and agriculture
  • Groundwater de-watering
  • Pressure boosting
  • Industrial applications.

Features and benefits:

  • State-of-the-art hydraulics provide high efficiency and low operating costs
  • 100 % stainless steel inside and outside
  • Sand resistant
  • Resistant to aggressive water
  • Dry-running protection
  • Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control

 

BM – Boosting Module
g.7
Grundfos high-pressure booster modules are used for boosting, liquid transfer and circulation in systems under high static pressure. Applications include reverse osmosis in domestic water supply, hospitals, laboratories, and the chemical, electronics and metals industries. The pumps are also used for ultrafiltration in the chemical and galvanizing industries, painting workshops, and the metals and mineral industries.
Applications :
The booster modules are suitable for pressure boosting in such systems as:

  • reverse osmosis systems
  • water supply systems
  • water treatment systems and Industrial plants.

Features and benefits :

  • all stainless steel
  • low noise
  • simple installation
  • modular design
  • compact design
  • leakage-free

Grundfos Direct Sensors

rps

Relative Pressure Sensor:
RPI /RPI +T
The pressure sensor efficiently combines pressure and temperature measurement in just one sensor. Transforming the pressure in and temperature of the water into electrical signals, the transmitter offers very accurate measurement in almost any liquid.

Pressure Range: 25 bar
Media Temperature: -30 C to 120 C
Output (press): 4 to 20 mA
Output (press + temp): 2 x 0 to 10 V

rps

The heart of the sensor is a coated SMART sensor, which transforms the pressure and temperature of the medium into electrical signals. These signals are calibrated, conditioned and presented in analogue or digital format by means of a microprocessor. The pressure signals are temperature compensated and linearised for the influence of temperature variations.

 

rps

Differential Pressure Sensor:
DPI/DPI+T
Benefit from reliable differential pressure measurement with the unique direct transmitter that eliminates the need for pressure transmitters on both sides of the pump. The transmitter can be delivered as a combined differential pressure and temperature measurements in one.

Pressure Range:  16 bar
Media Temperature:  -30 C to 120 C
Output (press):  4 to 20 mA
Output (press + temp):  2 x 0 to 10 V

 

rpsThe heart of the sensor is a coated SMART sensor, which transforms the differential pressure (difference in pressure between the two ports) and temperature of the medium into electrical signals. These signals are calibrated, conditioned and presented in analogue or digital format by means of a microprocessor. The pressure signals are temperature compensated and linearised for the influence of temperature variations. On how to utilize the differential pressure principle, please see DPS under Products/Standards.

 

rps

Vortex Flow Sensor:
VFI
The flow transmitter successfully combines the established vortex principle with the patented Silicoat® technology. The result is an affordable and accurate direct flow transmitter designed for reliable operation in aggressive media.

Folw Range: 0.9 m3/hr to 240 m3/hr
Media Temperature: -30 C to 120 C
Output (press): 4 to 20 mA

rpsBy combining the established vortex principle (von Karman, 1912) with the unique metal-glass coating, Silicoat® from Grundfos, an affordable, accurate and direct flow sensor for aggressive media is now available. The flow sensor is without any moving parts, which could deteriorate or commence clogging. The Vortex Street generates two series of turbulence (vortices) shedding behind a bluff body. By increasing flow the frequency of the vortices will increase and the frequency increases directly proportional to the flow in a full pipe. The Vortex Flow Sensor consists of a sensor, Vortex Tube and element. The sensor detects the pressure pulsation generated by the vortices, and converts the pulsation into an electrical output signal. The frequency of the pressure pulsation is a measurement of the velocity and in the defined flow pipe the actual flow is measured.